Tilt-Shift Micro Four Thirds Lens Adapter
A simple tilt-shift adapter that mounts a Nikon Series E 50mm lens on any Micro Four Thirds body. Tilting the lens off-axis creates a tilt-shift or miniature-effect look straight out of the camera, without the cost of a commercial tilt-shift lens.
What you'll need
- 3D printer
- Micro Four Thirds camera body
- Nikon Series E 50mm lens
Suggested material: PLA. No supports needed.
Design by Joe_Murphy, originally published on Thingiverse. Shared here unmodified under CC BY-SA 4.0.