Sony E-Mount Body to Nikon F-Mount Lens Adapter (Improved)
A two-part adapter (screwed together) for mounting Nikon F-mount lenses on Sony E-mount bodies. Splitting it into two pieces lets you fine-tune the length with a shim instead of sanding it down, which used to risk making the lens mount loose. The camera-side click/lock is tighter than the original single-piece design for a firmer fit.
What you'll need
- 3D printer
- Sony E-mount camera body
- Nikon F-mount lens
Suggested material: PLA or similar rigid filament. Assemble the two halves with a shim between them to fine-tune the total length for your specific lens.
Design by Efeler_Gibi, originally published on Printables. Shared here unmodified under CC BY 4.0.