Nikon SB-600 Flash Bounce/Diffuser
A bounce card for the Nikon SB-600 flash, for anyone who used to tape a playing card to their flash to bounce light before getting a 3D printer. Slides onto the flash head and holds on firmly enough that no adhesive is needed. Prints without supports.
What you'll need
- 3D printer
- Nikon SB-600 flash
Suggested material: PLA. Prints without supports at 0.2mm layers.
Design by jolars, originally published on Thingiverse. Shared here unmodified under CC BY-SA 4.0.