Disposable Camera Lens Adapter
Disposable cameras are cheap, plentiful, and their plastic lenses are surprisingly fun on a real camera. Pull the lens out of the housing, print a holder, and mount it on a Sony E-mount body with a bit of glue. A single lens gives roughly 35mm (full frame) or 50mm (APS-C); two disposable cameras combined into the double-lens assembly give 17mm (full frame) or 26mm (APS-C).
What you'll need
- 3D printer
- Sony E-mount camera
- One or two disposable cameras (for the plastic lens)
- Black filament
- Glue
Suggested material: Black filament (PLA or similar). Print in black to keep stray light out of the lens path.
EMountFlange.stl SingleLens_LensNut.stl SingleLens_FocusRing.stl DoubleLens_LensNut.stl DoubleLens_FocusRing.stl DoubleLens_ApertureShim.stl InnerRing.stl
Design by volzotan, originally published on Printables. Shared here unmodified under CC BY 4.0.