Camera Lens Cap Holder
A parametric buckle that threads onto your camera strap and grips a lens cap by friction, with a small overhang lip for extra hold. The included STL is sized for a 58mm lens cap and a ~40mm strap; a second file is sized for a 77mm cap on a 27mm strap.
What you'll need
- 3D printer
- Camera strap
- 58mm or 77mm lens cap
Suggested material: PLA or similar rigid filament. The printed layer lines themselves provide the friction grip on the lens cap.
Design by kitlaan, originally published on Printables. Shared here unmodified under CC BY-SA 4.0.